Stock Aerial Units

GO OUT, OVER AND UNDER.

Engineered to perform on both custom and commercial chassis, the Squrt® Articulating Water Tower allows you to position your master stream anywhere the scene demands. The Squrt Articulating Water Tower reaches out, over and under obstructions, positioning your master stream where it’s needed. This lightweight water tower combines excellent aerial master stream performance with a short wheelbase and the ability to customize it just the way you want.

THE COMPACT TELESQURT® GIVES DEPARTMENTS MAXIMUM MANEUVERABILITY.

It is a rated aerial allowing you to respond with the maneuverability of a pumper, and the ideal first-out unit for departments that respond to a variety of fire and rescue calls with a demand for aerial operations.

TeleSqurts are available in two models, with vertical reaches of 50’ (15 m) and 65’ (20 m). Each features fold-down hand rails that can be positioned in the traveling position for low overall heights of 11’2” (3.4 m) and 11’9” (3.6 m) respectively to handle low station doors, aqueducts, bridges and overpasses.

Under Ten (UT). For many departments, the dimension that drives aerial apparatus selection is the overall height. The Smeal UT 100′ Rear Mount Ladder design is based around the 105′ aerial structure with those crucial 5 inches of overall height shaved down to 11’6″ thanks to lower aerial side rails. So you can fit it into your fire station and under all the bridges, overpasses and aqueducts that stand in the way of a quick response. The 500 lb. tip load rating while flowing 1,250 GPM at zero degrees give you all the firefighting power you need. Available with or without a pump and tank, you have the configuration flexibility for your UT 100′ Rear Mount Ladder that you’ve come to love from Smeal.

The Smeal 100′ Mid Mount Ladder provides superior aerial performance, and, with a low overall travel height of 10′, it lets you go where others just might not fit — into an historic fire house and under low bridges and aqueducts. Or, if travel height isn’t a challenge for your department, increase your compartment space to what works for you. The Smeal Mid Mount Ladder features a rated tip load of 500 lb. while flowing 1,250 GPM, at all angles, at full extension. The operating range is -6 to 72 degrees standard. Whether a mid mount or rear mount design Smeal’s commitment to safety and exceptional performance for the life of your aerial is always strong.

It’s all about reach with Smeal’s 125′ Heavy Duty Aerial. This robust ladder has the longest horizontal reach available — 121′ at 0 degrees to make short work of large setbacks. Combine that with a tip load rating of 500 lbs. while flowing 1,250 gpm and no performance restrictions on a downhill slope thanks to Smeal’s exclusive FP-4 stabilizer design, and you have one of the highest performing, most versatile aerials anywhere. In addition, the standard operating range of -12 to 72 degrees, ensure you can handle below-grade rescues as well as high-rise firefighting and rescues.

The Smeal 55’ Heavy-Duty Aerial combines a manueverable, single-axle configuration with an elevated master stream that lets you do the work you need to do. With a 500 lb. tip load rating while flowing 1,500 GPM at 0° elevation, this compact aerial can carry up to 750 gallons of water and has the proven design features that make all Smeal aerials such outstanding performers.

Count on Smeal 105′ heavy-duty rear mount ladders for their robust design, 750 lbs. tip load (wet) at 0 degrees and excellent vertical reach. We measure our vertical reach at just 72 degrees, and we don’t even count the detachable egress, so our 105′ ladder provides 107′ and 109′ feet of vertical reach, depending on the egress you select. And, thanks to the unique outrigger design and placement, you’ll also be able to achieve full operational capability on a 12-percent grade (downhill and uphill). When the challenge is great, the Smeal 105′ heavy-duty rear mount ladder will never let you down.

The Smeal 75′ heavy-duty aerial is designed to be the centerpiece of your aerial attack and rescue operations. Built with 100,000 psi yield strength steel, this aerial workhorse provides a 750 lb. tip load rating (wet), the ability to flow 1,500 GPM at 0 degrees elevation straight out to the side, and the solid “step feel” that all Smeal aerials are known for. Available on a single or tandem axle chassis, this all-around aerial will help you get the job done.